1000
Miniature Slide Switches
Features/Benefits
- Variety of actuators and terminations
- Panel mount tabs available
- Epoxy terminal seal—compatible with bottom-wash cleaning
- RoHS compliant
Typical Applications
- Test & measurement equipment
- Telecommunications
- Computer & peripherals
Specifications
- CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or DC max. Q contact material: 6 AMPS @ 120 V AC or 28 V DC, 3 AMPS @ 250 V AC. See page J-15 for additional ratings.
- ELECTRICAL LIFE: 100,000 make-and-break cycles at full load on models with B, K or P contact material; 40,000 cycles on models with G, Q, L, M, S or R contact material.
- CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts.
- INSULATION RESISTANCE: 109 Ω min.
- DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
- OPERATING TEMPERATURE: –30ºC to 65ºC
- SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging).
Materials
- CASE: diallyl phthalate (DAP), (UL 94V-0).
- ACTUATOR: Nylon, black, standard.
- HOUSING: Stainless steel.
- SWITCH SUPPORT: Brass or steel, matte-tin plated.
- END CONTACTS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Coin silver, silver plated. See page I-16 for additional contact materials.
- CENTER CONTACT & ALL TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page J-16 for additional contact materials.
- TERMINAL SEAL: Epoxy. Refer to Soldering and Cleaning in Technical Data chapter