- Homepage
- Products
- Switches
- Pushbutton
- Product Detail
8060
Alternate Action and Momentary Pushbutton Switches

Features/Benefits
- Long travel
- Available with LED
- Long life contact design
- Epoxy terminial seal compatabile with bottom wash cleaning
- RoHS compliant models available
Typical Applications
- Instrumentation
- Computers and peripherals
- Telecommunications and networking equipment
Specifications
- CONTACT RATING: Q contact material: 6 AMPS @ 120 V AC or 28 V DC; 3 AMPS @ 250 V AC. See page A-59 for additional ratings.
- ELECTRICAL LIFE: 50,000 make-and-break cycles at full load.
- CONTACT RESISTANCE: Below 20 mΩ typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts.
- INSULATION RESISTANCE: 109Ω min.
- DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
- OPERATING TEMPERATURE: –30ºC to 65ºC
- SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging).
- CAP INSTALLATION FORCE: 10 lbs. maximum permissible.
Materials
- CASE: Glass filled nylon 6/6 or diallyl phthalate (DAP),flame retardant (UL 94V-0).
- PLUNGER: S, S1, S2 Options: Glass filled nylon or glass filled polyester (PBT) (UL 94V-0). L, L1 Options: Brass, nickel plated.
- CAP & FRAME: Nylon, black standard.
- BUSHING: Brass or zinc, nickel plated.
- HOUSING: Stainless steel.
- SWITCH SUPPORT: Brass or steel, matte-tin plated.
- END CONTACTS: Q contact material: Coin silver, silver plated. See page A-59 for additional contact materials.
- CENTER CONTACT & ALL TERMINALS: Q contact material: Copper alloy, silver plated. See page A-59 for additional contact materials.
- TERMINAL SEAL: Epoxy. Refer to soldering and cleaning in Technical Data Chapter.
- HARDWARE: Nut & Locking Ring: Brass, nickel plated; Lockwasher: Steel, nickel plated.

