BD
Standard Profile DIP Switches
Features/Benefits
- Traditional full profile DIP switch
- Extended actuator for easy actuation
- Open bottom construction allows for solder washing without the need for tape seal
- RoHS compliant
Typical Applications
- Address switch for industrial controls
- Logic switching for computers and peripherals
- Function controlling for numerous applications
Specifications
- SWITCH FUNCTION: SPST - 1 thru 12 position available (except 11 position).
- CONTACT RATING: Carry: 100 mA max. @ 50 V DC. Switch: 100 mA max. @ 5 V DC or 25 mA max. @ 25 V DC.
- MECHANICAL AND ELECTRICAL LIFE: 10,000 make-and-break cycles at full load, each circuit.
- CONTACT RESISTANCE: Below 50 milliohms typ. initial @ 2-4 V DC 100mA.
- INSULATION RESISTANCE: 109 ohms min.
- DIELECTRIC STRENGTH: 500 V RMS min. @ sea level between adjacent terminals.
- CAPACITANCE: 5pF max. between adjacent terminals.
- STORAGE & OPERATING TEMPERATURE: -40°C to 85°C.
- SHOCK: Withstands 20g 11 ms sawtooth waveform with no contact opening greater than 10 microseconds.
- VIBRATION: No contact opening greater than 10 microseconds and no contact closure when exposed to vibration .06 in DA or 5g, whichever is less, from 10 to 55 Hz, and 10g from 55 to 500 Hz.
- SOLDERABILITY : Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging).
- PACKAGING: Switches supplied in rigid dispensing tubes in full-tube quantities only: this may effect order quantity. Number of switches per tube varies with model. Switch position 1 denotes pin number 1. All switch actuators in ‘OFF’ position, standard.
Materials
- CASE & COVER : Glass filled polyester (PBT),flame retardant (UL 94V-0).
- ACTUATOR : Glass filled nylon 6/6, flame retardant,heat stabilized (UL 94V-0)
- CONTACTS: Gold over nickel over phosphor bronze.
- TERMINALS: Matte-tin over nickel over phosphor bronze.