BP
Side Actuated DIP Switches
Features/Benefits
- Side actuated contacts for right angle applications
- When actuated, contacts remain below top of switch
- Ideal for applications where space is limited
- Available with tape seal for most washing processes
- RoHS compliant
Typical Applications
- Address switch for industrial controls
- Logic switching for computers and peripherals
- Function controlling for numerous applications
Specifications
- SWITCH FUNCTION: SPST – 1, 2, 3, 4, 5, 6, 7, 8, 10 & 12.
- CONTACT RATING: Carry: 100 mA max. Switch: 100 mA max. @ 5 V DC or 25 mA max. @ 24 V DC.
- MECHANICAL AND ELECTRICAL LIFE: 2,000 make-and-break cycles each circuit, models with gold contacts (K contact material).1,000 cycles, models with tin contacts (Y contact material).
- CONTACT RESISTANCE: Below 50 milliohms initial @ 2-4 V DC, 100mA.
- INSULATION RESISTANCE: 109 Ω min.
- DIELECTRIC STRENGTH: 500 V RMS min. @ sea level between adjacent terminals..
- STORAGE & OPERATING TEMPERATURE: -20°C to 60°C.
- SOLDERABILITY: Per MIL-STD -202F Method 208D or EIA RS-186E method 9 (1 hours steam aging).
- PACKAGING: Switches supplied in rigid dispensing tubes in full-tube quantities only; this may affect order quantity. Number of switches per tube varies with model. Switch position 1 denotes pin no. 1. All switch actuators in “OFF” position, standard.
Materials
- CASE: Glass filled polyester (PET), flame retardant (UL 94V-0).
- COVER: Anodized aluminum.
- ACTUATOR: Glass filled polyester (PET), flame retardant (UL 94V-0).
- CONTACTS: K contact material: Gold over nickel over phosphorbronze. Y contact material: Phosphor bronze, matte-tin plated.
- TERMINALS: Phosphor bronze, matte-tin plated.
- TERMINAL SEAL: Epoxy.
- TAPE SEAL: Metalized polyester.