- Homepage
- Catalog
- Smart Card Connectors
- Product Detail
CCM02 MK I
Original landing system
CCM02 MK I is a connector with landing contacts.
Features
- Available with 8 through hole contacts.
- 100,000 card insertion cycles.
- The contacts do not touch the card until it is almost fully inserted - a minimal wiping action removes any non-conductive material.
- The connector has been designed to give a positive feel as the card is fully inserted.
- For added reliability, the integrated card end-travel switch (which is normally open) is sealed against dust and grit.
- Contacts Copper alloy
- Plating Contact area : Gold over Nickel
- Terminals : Tin lead (2µ min)
- Moldings Thermoplastic UL 94V-0 rated
- Number of Contacts 8
- Mechanical life 100,000 cycles min
- Card insertion force 10 N max
- Card extraction force 1 N min / 10 N max
- Contact force 0.15 N min / 0.35 N max
- Vibration Frequency 10 to 500 Hz. Acceleration 50m/s2 Duration 6 hours - amplitude 0,35 mm Max electrical discontinuity 1µs
- Shock Peak value 500 m/s2 – Duration 11 ms 3 shocks in each direction of each axis Max electrical discontinuity 1 µs
- Insulation resistance 1,000 MΩ min
- Resistance 100 mΩ max
- Current rating 10 µA min / 1 A max
- Dielectric strength 750 Vrms min
- Card detection switch Normally open
- Contact resistance 100 mΩ max
- Dielectric strength 250 Vrms min
- Current rating 1 mA min / 10 mA max
- Maximum power 0.2 VA
- Operating temperature -40°C to +85°C
- Soldering temperature Wave: 260°C / 5 sec
- Damp heat IEC 512 test number 11c (10 days)
- Salt mist IEC 512 test number 11f (96 hours)
- Card detection switch Sealed IP 54