Designing Technology into Solutions
 

Check Distributor Stock

 

CCM03 MK II

Toolbox

View product series matrix

Ask a specialist

Sales locator

Literature

Print this page

Download CCM03MKII

Download SmartCard Guide

Interfaces with SIM/SAM cards

CCM03 MK II, Smart Card Connectors
A new range of CCM03 connectors have been developed to interface with SIM/SAM cards as defined by GSM11-11 and ENV1375-1. The connectors are available with either hinged covers or fixed covers and have been designed to minimize the amount of space needed for PCB mounting.

Features

  • Hinged Cover
  • Available with 6 or 8 contacts, with or without PCB locating pegs.
  • Available with insulated card presence switch.
  • The cover springs open when unlocked while the card is in place.
  • The molding is polarized so that the cover can only be closed if the card is correctly inserted.
  • The cover can be replaced without removing the connector from the PCB.
  • Inspection slots allow an electrical test to be made without opening the cover.
  • The overall height of the connector is only 2,5 mm. The amount of space needed to mount the connector is just 29,65 mm x 17,2 mm.

Fixed Cover

  • Available with 6 or 8 contacts.
  • The overall height of the connector is 2,85 mm max. Only 25,5 mm x 17,2 mm of board space is required to mount the connector.

General

  • With tape and reel packaging as standard, the connectors are designed to be automatically pick-and-placed.
  • The high temperature thermoplastic moldings are suited for infrared and convection soldering processes.
  • By using an inlay finish in the contact area the life of the precious metal is extended by over 10 times that of standard gold plating.
  • Robustly formed printed circuit tails allow a co-planarity of ± 0,05 mm to be maintained.
  1. Contacts Copper alloy
  2. Plating Contact area : Gold alloy inlay or gold over nickel
  3. Terminals : Tin lead (2µ min)
  4. Moldings High temp. thermoplastic UL 94V-0 rated
  5. Slide lock/metal cover Stainless steel
  6. Number of Contacts 6 or 8
  7. Mechanical life, hinged cover 10,000 cycles min
  8. Mechanical life, fixed cover 50,000 cycles
  9. Card insertion force Hinged cover: 1 N max Fixed cover: 3 N max
  10. Card extraction force Hinged cover: 1 N max Fixed cover: 0.80 N min / 3 N max
  11. Contact force 0.25 N min / 0.50 N max
  12. Slide locking force 2 N min / 6 N max
  13. Vibration Frequency 10 to 500 Hz. Acceleration 50m/s2 Duration 6 hours - amplitude 0,35 mm Max electrical discontinuity 1µs
  14. Shock Peak value 500 m/s2 – Duration 11 ms 3 shocks in each direction of each axis Max electrical discontinuity 1 µs
  1. Insulation resistance 1,000 MΩ min
  2. Resistance 100 mΩ max
  3. Current rating 10 µA min / 1 A max
  4. Dielectric strength 750 Vrms min
  5. Card detection switch Normally open
  6. Contact resistance 100 mΩ max
  7. Dielectric strength 250 Vrms min
  8. Current rating 1 mA min / 10m A max
  9. Maximum power 0.2 VA
  10. Operating temperature -40°C to +85°C
  11. Soldering temperature Temperature/time profile acc. to CECC00802 para. 6.1, Fig. 3 with peak temperature 250°C
  12. Damp heat IEC 512 test number 11c (10 days)
  13. Salt mist IEC 512 test number 11f (96 hours)
 

Copyright © 2008 CoActive Technologies All rights reserved.