- Homepage
- Catalog
- Smart Card Connectors
- Product Detail
CCM04 MKII
Low profile connector without card guiding (ISO card)
The CCM04 without card guidance is used where space is at a premium and the card guidance can be built around the connector (rather than provided by the connector itself).
The CCM04 low profile without card guidance is dedicated to applications where the overall height of the
connector is paramount. A range of low profile CCM04 connectors are available with 1.25 mm thick moldings.
The wide choice of contact configurations and molding heights suit a broad range of applications.
The CCM04 low profile without card guidance is dedicated to applications where the overall height of the
connector is paramount. A range of low profile CCM04 connectors are available with 1.25 mm thick moldings.
The wide choice of contact configurations and molding heights suit a broad range of applications.
Features
- Available in two molding heights 1,25 mm and 2,75 mm.
- The integrated card detection switch (optional) is sealed against dust and grit.
- By using an inlay finish in the contact area, the life of the precious metal is extended by more than 10 times that of standard gold plating.
- The height of the contact above the insulator is 0,75 mm, allowing a wider tolerance for the card entry slot.
- The contact area is spooned to reduce the risk of accidental (or deliberate) damage and to optimize the electrical connection with the card.
- The tip of the contact is protected by the molding so that it cannot catch on the card as the card is being inserted.
- The contact design ensures a consistent and reliable contact force over the life of the connector.
- Robustly formed printed circuit tails are well protected by the insulator body.
- The moldings are made from high temperature thermoplastic suited for infrared and convection soldering processes.
- With tape and reel packaging as standard, the connectors are designed to be automatically picked & placed.
- Contacts Copper alloy
- Plating Contact area : Gold alloy inlay
- Terminals : Tin lead (2µ min)
- Moldings High temp. thermoplastic UL 94V-0 rated
- Number of Contacts 6, 8
- Mechanical life 50,000 cycles min
- Contact force 0.25 N min / 0.5 N max
- Card detection switch 0.8 N max for actuation (end travel switch actuation force actuates when card is 0,9 mm from card stop) 1.8 N max for complete depression
- Vibration Frequency 10 to 500 Hz. Acceleration 50m/s2 Duration 6 hours - amplitude 0,35 mm Max electrical discontinuity 1µs
- Shock Peak value 500 m/s2 – Duration 11 ms 3 shocks in each direction of each axis Max electrical discontinuity 1 µs
- Insulation resistance 1,000 MΩ min
- Resistance 100 mΩ max
- Current rating 10 µA min / 1 A max
- Dielectric strength 750 Vrms min
- Card detection switch Normally open (closes on card insertion)
- Contact resistance 100mΩ max
- Dielectric strength 250 Vrms min
- Current rating 1 mA min/ 10 mA max
- Maximum power 0.2 VA
- Operating temperature -40°C to +85°C
- Soldering temperature Temperature/time profile acc. to CECC00802 para. 6.1, Fig. 3 with peak temperature 250°C
- Damp heat IEC 512 test number 11c (10 days)
- Salt mist IEC 512 test number 11f (96 hours)
- Card detection switch Sealed IP 54 For CCM04 1889
- Sealed against dust for other versions