- Homepage
- Products
- Switches
- Pushbutton
- Product Detail
E010
Sealed Momentary Pushbutton Switches
Features/Benefits
- Process sealed, withstands soldering and cleaning
- Long life contact design
- Snap-fitting plunger available, accepts a variety of caps
- RoHS compliant models available
Typical Applications
- Instrumentation
- Telecommunications and networking equipment
- Computers and peripherals
Specifications
- CONTACT RATING: Q contact material: 4 AMPS @ 125 V AC or 28 V DC. See page A-50 for additional ratings.
- ELECTRICAL LIFE: 40,000 make-and-break cycles at full load.
- CONTACT RESISTANCE: Below 20 mΩ typ. initial @ 2–4 V DC, 100 mA, for both silver and gold plated contacts.
- INSULATION RESISTANCE: 109Ω min.
- DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
- OPERATING TEMPERATURE: -30ºC to 75ºC.
- CAP INSTALLATION FORCE: 10 lbs. max. permissible.
- SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging).
Materials
- CASE & BUSHING: Glass filled nylon 6/6, flame retardant (UL 94V-0).
- PLUNGER: Glass filled nylon or glass filled polyester (PBT) (UL 94V-0), with internal o-ring seal standard.
- SWITCH SUPPORT: Brass or steel, matte-tin plated.
- SWITCH SUPPORT RETAINER: Stainless steel.
- END CONTACTS: Q contact material: Coin silver, silver plated. See A-50 for additional ratings.
- CENTER CONTACTS & ALL TERMINALS: Q contact material: Copper alloy, silver plated. See page A-50 for additional ratings.
- TERMINAL SEAL: Epoxy.
- HARDWARE: Nut & locking ring-Brass, nickel plated. Lockwasher-Steel, nickel plated.