Designing Technology into Solutions
 
 

TS

TS, Slide

Features/Benefits

  • Reliable contact design ensures long electrical life
  • Ratings up to 3 AMPS
  • Epoxy terminal-seal compatible with bottom wash cleaning
  • RoHS compliant

Typical Applications

  • Test & measurement equipment
  • Computers & peripherals
  • Telecommunications & networking equipment

Specifications

  1. CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or DC max. Q contact material (TS01 Model): 3 AMPS @ 120 V AC or 28 V DC; (TS02, TS03 Models): 1 AMP @ 120 V AC or 28 V DC. See page I-10 for additional ratings.
  2. ELECTRICAL LIFE:TS01 MODELS: 60,000 make-and-break cycles at full load.TS02, TS03 MODELS: 30,000 cycles.
  3. CONTACT RESISTANCE: Below 20 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts.
  4. INSULATION RESISTANCE: 109 Ω min.
  5. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
  6. OPERATING TEMPERATURE: –30ºC to 85ºC
  7. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging).

Materials

  1. CASE: Glass filled nylon 4/6, flame retardant, heat stabilized.
  2. ACTUATOR: Nylon, black standard.
  3. HOUSING: Stainless steel or stainless steel, nickel plated.
  4. END CONTACTS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Coin silver, silver plated. See page I-10 for additional contact materials.
  5. CENTER CONTACT & ALL TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page J-10 for additional contact materials.
  6. TERMINAL SEAL: Epoxy. Refer to Soldering and Cleaning in Technical Data chapter.