7000
Miniature Rocker & Lever Handle Switches
Features/Benefits
- Multi-pole and multi-position
- Wide variety of actuator and termination options
- Epoxy terminal-seal compatible with bottom wash cleaning
- RoHS compliant
Typical Applications
- Telecommunications
- Instrumentation
- Medical equipment
Specifications
- CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or DC max. Q contact material: 5 AMPS @ 120 V AC or 28 V DC;2 AMPS @ 250 V AC. See page H-21 for additional ratings.
- ELECTRICAL LIFE: 7X01 and UX1 models: 100,000 make-and-break cycles at full load. All other models: 40,000 cycles.
- CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts.
- INSULATION RESISTANCE: 109 Ω min.
- DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
- OPERATING TEMPERATURE: –30ºC to 85ºC.
- SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging).
Materials
- CASE: Glass filled nylon 6/6, flame retardant, heat stabilized, or diallyl phthalate (DAP) (UL 94V-0).
- ACTUATOR: Nylon, black.
- FRAME (FRONT MOUNT): Nylon, black.
- FRAME (REAR MOUNT): Spring steel, black.
- BUSHING: Brass or zinc, nickel plated.
- HOUSING: Stainless steel.
- SWITCH SUPPORT: Brass or steel, matte-tin plated.
- END CONTACTS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Coin silver, silver plated. See page H-21 for additional contact materials.
- CENTER CONTACTS & ALL TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page H-21 for additional contact materials.
- TERMINAL SEAL: Epoxy. Refer to Soldering and Cleaning in Technical Data Section
- HARDWARE: Mounting nuts & screws: Brass. Lockwasher: Stainless steel. Standoff: Nylon standard.